Vehicle Control Addon 9.0.2.4

FS22 mods

iconWatch Vehicle Control Addon 9.0.2.4 video

About the mod:

This script changes the steering speed depending on the driving speed, and it rotates the camera according to the steering angle and direction. Shift-Left limits throttle, cruise control and maximum RPM to 75%. With Shift-right and arrow keys you can look in the corresponding direction. If you press the left Ctrl key together with the W key, then the direction of movement will remain unchanged. Additionally, there is a simple gearbox. There was never a plan to make a super realistic gearbox.

The following gears are available:
– off: standard gearbox without setting;
– IVT: still the standard gearbox, but with small settings in the permissible rpm range;
– 4X4: old-fashioned 4-speed gearbox in 4 groups. Changing gears takes time and you can lose momentum;
– 4PS: same transmission as above, but with gear shifting;
– 2X6: two groups with 6 gears. This transmission is useful for G27 / G29 gear shifters. There is a low and high range. 6 gears in each band are not the same as 6 gears in another band;
– FPS: Full Power Shift: the gearbox has 12 gears and shifts without interruption;
– 6PS: 6 gears with power shift: This transmission has 6 gears. Each gear can be reduced by about 80%.

All functions can be toggled using the following default key combinations:
– Left Ctr + C: settings;
– Left Ctr + W: snap angle (continued);
– Left Alt + W: anchor angle (reset);
– Left Shift: Throttle Limiter / Cruise Control Decrease;
– Right Shift + cursor: look forward, backward, left, right;
– Space: change direction (so called shuttle control).

Please check the keys to switch.
G27 / G29 gear shifters are supported.
7th gear is special. If you are using the ksmShifter7 action binding, make sure shuttle control is enabled. This action binding will shift into 1st reverse gear.
The best drivetrain when combined with a shifter is 2X6, FPS and 6PS.
– Automatic transmission processing;
– Added the ability to adjust the maximum speed;
– Other new settings.

GitHub version – 9.0.2.4

– FS 22 release

Credits:
Stefan Biedenstein

How to install FS19 mods?

Firstly find a mod which you like and want to download. Then download a mod to your PC. Mods are usually in .zip format file. But sometimes it can be in .rar. If a mod file is a .zip format no needed additional actions. If a file is in .rar, then you must unarchive mod with software like WinRar or Zip7. Windows 10 users no need to use software for archives, Win10 itself has a feature to unarchive files.

The next step is to find mods folder in your PC. Usually, it is in Documents/My Games/Farming Simulator 19/2019. Open the "mods" folder and put downloaded .zip archive or unarchived .rar file to this folder.

Last step. Enjoy of FS19 mods!

Leave a Reply

Your email address will not be published. Required fields are marked *