Vehicle Control Addon v 1.0

FS19 mods

About the mod:

This script varies the steering speed depending on the speed you are driving, and it rotates the camera to match the steering angle and direction. Shift-Left limits throttle, cruise control and maximum rounds per minute to 75%. With Shift-right and the cursor keys you can peek in the corresponding direction. If you press Ctrl left together with W then the driving direction snaps to fixed directions. Additionally, there is a simple gear box. It was never planned to make a super realistic gearbox. The following transmisions are available:
off: the standard gearbox without customization
IVT: Still the standard gearbox but with little adjustments to the allowed RPM range. More to come…
4X4: An old fashioned transmissoin with 4 gears in 4 groups and shuttle control. Shifting gears takes time and you might lose momentum.
4PS: The same transmissoin as above but with power shift for the gears
2X6: Two groups with 6 gears. This transmission is useful for G27/G29 gear shifters. There is a low and a high range. The 6 gears in each range do not overlap with the 6 gears in the other range
FPS: Full Power Shift: The transmission has 12 gears and shifts without interuption.
6PS: 6 gears with power shift: This transmission has 6 gears. Each gear can be reduced by about 80%
All functions are switchable with the following default key combinations:
Ctrl Left + C: Settings
Ctrl Left + W: Snap Angle (continue)
Alt Left + W: Snap Angle (reset)
Shift Left: Throttle limiter / reduced cruise control speed
Shift Right + Cursor: look forward, backwards, left right
Space: Change direction (aka shuttle control)
Please check the keys for shifting. G27/G29 gear shifters are supported.
The 7th gear of the gear shifter is special. If you use action binding ksmShifter7 please make sure that shuttle control is enabled. This action binding will swtich into 1st reverse gear.
Best transmission in combination with a gear shifter are 2X6, FPS and 6PS.

Credits:
Mogli12

How to install FS19 mods?

Firstly find a mod which you like and want to download. Then download a mod to your PC. Mods are usually in .zip format file. But sometimes it can be in .rar. If a mod file is a .zip format no needed additional actions. If a file is in .rar, then you must unarchive mod with software like WinRar or Zip7. Windows 10 users no need to use software for archives, Win10 itself has a feature to unarchive files.

The next step is to find mods folder in your PC. Usually, it is in Documents/My Games/Farming Simulator 19/2019. Open the "mods" folder and put downloaded .zip archive or unarchived .rar file to this folder.

Last step. Enjoy of FS19 mods!

Leave a Reply

Your email address will not be published. Required fields are marked *